The Matrice 600 can be set-up in minutes thanks to the modular design, which make it ideal for land surveys.
The dust proof propulsion systems simplify maintenance while actively cooled motors make for reliable operation during extended periods of use.
All of the Zenmuse cameras and gimbals are natively compatible, and with a maximum payload of 6kg means this aerial system can fly the Ronin-MX gimbal and a range of cameras from the Micro Four Thirds systems to the RED Epic.
Smart Flight Safety
The Matrice 600 uses swine-wave driven, intelligent ESC’s to ensure it performs accurately, safely and efficiently while A3’s self-adaptive flight systems adjust flight parameters automatically based on payloads. The A3 can be upgraded with two additional GNSS and IMU units to A3 Pro or with D-RTK GNSS for enhanced accuracy.
With triple modular redundancy and diagnostic algorithms that compare sensor data from the three sets of units in real-time, the A3 Pro ensures that the Matrice 600 files exactly as expected.
The A3 GNSS system can be upgraded with centimetre-level accuracy. Using dual antennas, its heading reference is more accurate than a compass sensor, and it is able to withstand magnetic interference from metal structures.
Extended Flight Time and Transmission Range
The M600 features an extended flight time and 5 km long-range, ultra-low latency HD image transmission for accurate image composition and capture. A customised battery management system and power distribution board allows for all six batteries to be turned on with one button press, and keeps the system in flight in the event of a failure of a single battery, and allows users to check the battery status in real-time during flight.
Pix4Dcapture allows you to turn your drone into a mapping and measuring tool by defining autonomous mapping flights.
- Select an area for mapping
- Start a fully autonomous mission
- Images are taken automatically and are geo-tagged
- Interrupt mission at any time in case of danger
- Transfer images to your computer
3D Textured Model
- Full 3d triangle mesh with photorealistc texturing, perfect for sharing and online visualisations
- DSM - Digital Surface Models
- Accurate, georeference elevation map, ready for your preferred GIS workflow
- 3D Point Cloud
- Survey quality 3D points; clean from moving objects, aerial perspective with limited occlusions, and a low acquisition time
- High resolution aerial map with corrected perspective, putting you in control of geographical data generation
To legally fly a small unmanned aerial system in the UK the Operator is legally required to hold a Permission for Commercial Operations (PfCO) from the UK Civil Aviation Authority (CAA). Before a PfCO is issued the Operator must write and have approved an Operations Manual. Also any pilots who are to fly for that Operator must hold a CAA approved NQE issued qualification demonstrating their operating competence and flying capability.
Camera NOT included.
1 x Center Frame (Includes A3 and Lightbridge 2)
6 x Frame Arm with Propeller Holder
2 x Landing Gear Leg
2 x Landing Skid
1 x Left Retractable Module
1 x Right Retractable Module
2 x Retractable Module Mounting Rod
2 x Retractable Module Bracket
1 x Radio Controller (Transmitter)
6 x TB47S Flight Battery
2 x Charging Hub
2 x Spring
2 x Battery Charger
1 x AC Power Cable for Charger
1 x Micro-USB Cable
1 x GPS-Compass Pro
1 x GSP Mount
6 x Arm Stopper
1 x Landing Gear Stopper
6 x Knob with Gasket
1 x Screws Set
1 x Double Sided Tape Set
1 x Tape
1 x Battery Stickers
Camera NOT included.