Leica iCON GPS 70 T Antenna

Call For Price 0330 678 0181
With the iCON GPS 70 T, construction professionals can measure and Stake Out points quicker than ever before without the need to keep the pole vertical to level the bubble.
    Product Information

    With the iCON GPS 70 T, construction professionals can measure and Stake Out points quicker than ever before without the need to keep the pole vertical to level the bubble.

    The combination of the latest GNSS technology and inertial measurement unit (IMU) equips the gps 70 T with true tilt compensation.

    Free yourself form the boundaries and limitations of working with the pole in vertical positions and increase productivity compares to conventional methods. Collect as-built field data and Stake Out designs faster while increasing accuracy and reducing critical errors.

    Tilt – Traceability – Trust
    There is no need to hold the pole vertical when taking measurements. Full traceability by storing tilt values with each measurement improves the quality of control of any measured point. The permanent tilt compensation extends your measurement possibilities, improves quality and accuracy of your collected data as well as eliminating critical errors as levelling the bubble is no longer necessary.

    Permanent Tilt Compensation

    • Calibration-free
    • Resistant to magnetic interferences
    • Increased measurement productivity and reduction of human error

    Superior and Future-proof GNSS Technology

    • 555 channels for more signals, faster acquisition and improved sensitivity
    • Intelligent management of multi-frequency, multi-constellation signals
    • Intelligent selection to automatically reject reflected or noisy signals

    Hardware and Ergonomics

    • Compact and lightweight housing
    • UHF radio
    • Tilt and non-tilt variant

    Smartcheck+ and Smarttrack+

    • Unique RTK technology provides continuous checks to guarantee correct results
    • Initialisation within seconds
    • Complete reliability

    Robustness for most demanding sites

    • IP66/IP68 protection
    • Built for extreme temperatures of -40°C to +65°C
    • Fulfils toughest standards throughout the complete product lifetime
    • Rugged aluminium housing

    iCON Field Solution

    • Seamless integration into iCON field solution
    • Easy-to-use software interface and seamless data flow throughout the workflow
    • Exceptional application functionality
    Leica ConX cloud-based collaboration tool for real-time 3D data exchange
    Technical Information
    GNSS Technology
    Self-learning GNSS Leica RTK Plus - Adaptive on-the-fly satellite selection
    Leica SmartyCheck Continuous check of RTK Solution 99.99% reliable
    Signal Tracking GPS (L1, L2, L2C, L5), Glonass (L1, L2, L33),
    BeiDou (B1, B2, B33), Galileo (E1, E5a, E5b, Alt-BOC, E63)
    Number of Channels 555 (more signals, fast acquisition, high sensitivity)
    Tilt Compensation Increased measurement productivity and
    Traceability Calibration-free
    Immune to magnetic disturbances
    Measurement Performance
    Time for initialisation Typically, 4s
    Real-time Kinematic Single baseline -  Hz 8 mm + 1 ppm / V 15 mm + 1 ppm
    Network RTK - Hz 8 mm + 0.5 ppm / V 15 mm + 0.5 ppm
    Real-time kinematic tilt compensated1 Topographic points (not for tatic control points) - Additional Hz pole tip uncertainty typically less than 8 mm + 0.4 mm/° tilt down
    to 30° tilt
    Post processing Static (phase) with long observations - Hz 3 mm + 0.1 ppm / V 3.5 mm + 0.4 ppm
    Static and rapid static (phase) - Hz 3 mm + 0.5 ppm / V 5 mm + 0.5 ppm
    Code differential DGPS / RTCM - Typically 25 cm
    Field controller and software Leica iCON site/build - Leica CC80 field controller
    User interface Buttons and LEDs - On / Off and Function button, 8 status LEDs
    Web server -Full status information and configuration options
    Data recording

    Storage – Removable SD card, 1 or 8 GB
    Data type and recoding rate – Leica GNSS raw data and RINEX data at up to 20Hz

    Weight 1.20kg / 3.50kg standard RTK rover setup on pole
    Dimensions 173x173x108mm
    Operating Temp. -40°C to +65°C
    IP Rating IP66

    Survey Equipment Hire

    Our extensive hire fleet is maintained to the highest standard, & consists of the very latest equipment available.

    Please call us to discuss your specific hire requirements. Long term hire rates are negotiable.

    0330 678 0181


    Click here for Hire Rates...

    Estimate Shipping
    • Yes No