The Inspire 2 takes everything that was good about the Inspire 1 and improves it.
Whether it is used for; Construction, Mining, Environmental Monitoring, Agriculture, Emergency Response, Aerial Photography, Archaeology, or Real Estate the Inspire 2 is a necessity for aerial surveys.
A new propulsion system optimised for power creates a new level of flight performance, the Inspire 2 flies up to 58mph, descends at 9m/s and climbs at 6m/s. It can accelerate from 0 to 50mph in just 5 seconds and flies at a max attitude angle 40˚. The two controller sticks are turned for more sensitivity, making delicate manoeuvres easier.
A dual battery system prolongs the flight time to a maximum of 27 minutes, while self-heating technology allows it to fly even in low temperatures.
Integrated into the Inspire 2 is the brand new CineCore 2.0 image processing system, capable of recording 5.2K videos in CinemaDNG, AppleProRes and more. CineCore 2.0 is built into the aircraft nose and works with any camera connected through the dedicated gimbal port.
Sense and Avoid
Forward and downward vision systems enable the Inspire 2 to detect obstacles up to 30 meters ahead, allowing protected flight up to 34mph at a controllable attitude angle of 25˚. Upward facing infrared sensors scan obstacles 16ft above, adding protection when flying in enclosed spaces.
Spotlight Pro is a powerful tracking mode that allows even single pilots to capture complex, dramatic images. It uses advanced visual algorithms to lock onto a subject during flight, regardless of the direction that the Inspire 2 flies, creating shots that would once have required a dedicated camera operator.
In addition to Spotlight Pro, a range of other intelligent flight and shooting modes are available. Obstacle avoidance is optimised when using Point of Interest and Waypoint modes, making complex shots simple and repeatable.
The 2-axis on-board FPV camera separates the flight view from the main camera view, effectively giving the Inspire 2 a dedicated TapFly camera. Tap a point onscreen in the FPV view to set a flight route and the Inspire 2 will automatically fly along that route leaving the pilot to focus on gimbal movement.
Smart Return to Home
Forward and downward vision systems allow the Inspire 2 to create a real-time map of its flight route as it flies. If the video transmission system signal is lost and Smart Return Home is enabled, it is able to fly home along its original route, and change to a straight-line when it regains signal.
Don’t’ forget your Licence.
The Civil Aviation Authority (CAA) declares that anyone using a drone needs to be aware of the regulations contained in the Air Navigation Order.
We recommend with the purchase of the Inspire 2, a 2-day training course provided by The UAV Academy. This gives you, the tools to become a certified commercial UAV pilot to fly the Inspire 2 for commercial purpose.
- 2-day ground school course
- Full support and checking service for the creation of your Operations Manual
- Final pilot’s exam
- Optional flight training