Tripod Adapter for Reference Spheres - 3 Set - 200mm

This set consisting of three tripod adapters with claw system is especially suitable for reference spheres with a diameter of 200mm. The reference sphere can easily be screwed on the adapter and, then, used for laser scanning. The three adapters for reference spheres with a diameter of 200mm are protected in a high-quality case; thus, they are optimally suitable for field work.

Product characteristics:

• Tripod adapter suitable for all claw systems
• Dimensions: 12cm height, 8cm diameter
• Adapter with M8 thread for screwing the reference sphere in tight
• The center of the unscrewed reference sphere (200mm) is located in the height of the vertical axis and the tilting axis of all total stations with a tilting axis height of 196mm (e. g. Leica, Trimble)
• Due to this position, the sphere's center can be determined tachymetrical easily by replacing the adapter by a prism
• Case with precut foam insert for safe transport
• Case dimensions: 300 x 275 x 110mm

Designated use:

• Positive centering of your reference sphere on a tripod by using a claw system
• Connect the fixed points marked on the ground with your laser scanning project by rigging up a tripod on a fixed point and clamping the tripod adapter into your tripod

Scope of application:

• Working with positive centering
• Creating reference points using fixed points on the ground by means of surveying tripod and tripod adapter with claw system
• Placing reference spheres in natural surroundings (woods and meadows) without suitable magnetic ground